hop blip and a jump Posted September 29, 2006 Report Share Posted September 29, 2006 (edited) Anyone out there got a fix it for the gasser pro airboxes????? i've heard lots of different things to do, what'll stop the water and mud gettin in???????? I'm fed up of people telling me to buy a beta instead coz you don't have to clean the airboxes out! Edited September 29, 2006 by rockhopper Link to comment Share on other sites More sharing options...
subira Posted September 29, 2006 Report Share Posted September 29, 2006 Split the airbox and seal the joints properly with RTV sealant. Should have been done at PDI. Once you have done it - just maintain as normal. No need to buy a Beta. Worst case if you have damaged the bottom half of the air box it will cost you Link to comment Share on other sites More sharing options...
pumpkin trials Posted September 30, 2006 Report Share Posted September 30, 2006 much the same as above best i have found is to split air box and put a bead of sicoflex 50 or similar ( any windscreen mastic should do) around the join and then put back together then add extra at the top back of air box where the rear guard comes down this stuff hardens but remains flexible whereas silicone stays to soft and gets pulled out too quickly Link to comment Share on other sites More sharing options...
hop blip and a jump Posted October 4, 2006 Author Report Share Posted October 4, 2006 sounds good, but how do you pull it apart without spliting the air box in the wrong place????????? Any pics Link to comment Share on other sites More sharing options...
seandellear Posted October 7, 2006 Report Share Posted October 7, 2006 I have one of the extended alluminium ones from a guy on here called Ian well worth having! much safer and easier to use! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now