philgasgas Posted July 10, 2007 Report Share Posted July 10, 2007 hello, i was wondering if anyone could tell me the amount of engine oil i put in to my gasgas bike? and also how much folk oil that goes in cheers phil Quote Link to comment Share on other sites More sharing options...
chris morris Posted July 10, 2007 Report Share Posted July 10, 2007 this is some info that i had from my 98 tx250 TYRE PRESSURE FRONT 6PSI BACK 4 PSI OIL PREMIX AT 70:1 (70ML PER 5 LITRES) WHEEL BEARINGS 6004 2RS SWINGARM BEARINGS HK1520 2RS FORK OIL 7.5 WEIGHT 330ML IN EACH LEG GEARBOX OIL 10W40, 650ML RADIATOR 500Ml PURE ANTIFREEZE (CASTROL) CHAIN TENSION TIGHTEN CHAIN UNTIL YOU CAN GET ONE FINGER BETWEEN TENSIONER AND FRAME CARB AIR/FUEL MIXTURE 3.5 TURNS OUT SPARK PLUG BP5ES Quote Link to comment Share on other sites More sharing options...
philgasgas Posted July 10, 2007 Author Report Share Posted July 10, 2007 thanks ever so much, thats a great help Quote Link to comment Share on other sites More sharing options...
peterb Posted July 11, 2007 Report Share Posted July 11, 2007 That's a good list. Best not to use a multi grade oil in the gearbox though, causes clutch drag. Use a straight 10 weight mineral oil only, or an ATF rated to Dexron III, never a synthetic. Re-fill with 700ml. I always run fuel/oil at 50:1 with a mineral oil, but then I am old fashioned and like to see a 2 stroke smoke a little. My preference for fork oil is 280ml 5 weight in each leg, I guess this is rider dependant. Bye, PeterB. Quote Link to comment Share on other sites More sharing options...
RobinSpain Posted November 10, 2020 Report Share Posted November 10, 2020 Would this information be the same for the jtx300? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.