Anyone here know if a standard set of hebo pegs will bolt straight on to a Seeley without getting the grinder or welder out, Or for that matter any of the other big pegs available.Thanks in advance

Edited December 1, 200718 yr by bo drinker

No, I had to get new brackets welded on to accommodate a set of Hebos.

Big John

Thanks B J. Whilst on the subject any one know the closest paint match for the Seeley red. Thanks

I fitted KTM pegs on one of my Seeleys they are well better than Hebo footrests and they went straight on!!!!

What KTM were they off, do you remember? Thanks.

PS how many Seeleys have you got ?

Edited December 2, 200718 yr by bo drinker

What KTM were they off, do you remember? Thanks.

PS how many Seeleys have you got ?

The seeley pegs, i used a pair of brackets that i purchased off trials cast.They cost

What KTM were they off, do you remember? Thanks.

PS how many Seeleys have you got ?

I have sent you a PM regards hondapants

I don't know about the Seeley hangers, but I fitted XR400/XR250 pegs straight onto my TLR and RTL without having to change the hangers. I bought them from Off Road Only.