Jump to content

Cant Get My Bike To Start - Help Please


dougalthedog
 Share

Recommended Posts

TY250 Mono

Normally starts 1st or 2nd kick, been stood for a few weeks.

Started no problem on Tuesday, came to start yesterday - no joy.

Checked good spark and fuel getting through.

Ive had the carb off and blown through with an airline - no gunge in float bowl.

Only thing I can think of is that the fuel has gone off. If I dip the plug in some fuel drained from tank and light with a cig lighter it burns.

If I remove wet plug from bike it will not burn???

Can anyone help please - its doing my head in.

Thanks in advance

Link to comment
Share on other sites

 

 

Fresh fuel is the key in this case I think.

I have been fooled into thinking that fuel I mixed last week would be good for this week.

think about what has changed since you last started the bike, have you adjusted the timing, no,then what ?

Peter

Link to comment
Share on other sites

 

Hi - a good spark in air may not be very good under pressure in the engine. therefore try a new plug - this should eliminate one thing. If still no joy then it must be fuel quality or possibly fuel contamination (with water?) Is ther any chance water could have got into the crankcase?

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...