tikka65 Posted December 16, 2008 Report Share Posted December 16, 2008 Just taken the front wheel out of my 1999 315R. There is a collared spacer on the disc side of the axle, but nothing on the other side. Just wondered as the axle does not sit flush with the forks on the right side. It is actually about 1/4inch in on the bottom fork clamp. Thanks Tommy Quote Link to comment Share on other sites More sharing options...
milfy Posted December 16, 2008 Report Share Posted December 16, 2008 (edited) tommy have look at this link it will help http://www.apexmotosports.com/montesa%20parts%20book/f-7.htm Edited December 16, 2008 by milfy Quote Link to comment Share on other sites More sharing options...
ktm2ride Posted January 5, 2009 Report Share Posted January 5, 2009 My 02 has a spacer on both sides. The non disc side is just a sleeve no collar. Quote Link to comment Share on other sites More sharing options...
jimmyl Posted January 5, 2009 Report Share Posted January 5, 2009 If no speedo drive should have a after market spacer on non disc side. If speedo then no spacer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.