yamty175 Posted August 3, 2011 Report Share Posted August 3, 2011 Had to do the hacksaw trick to remove the pivot bolt from the sleeve on the swinging arm. Anyone know the best way to get the old bushes out? Soak them in some noxious liquid, gasket remover, acetone etc? 1976 TY175. Thanks, Jon. Link to comment Share on other sites More sharing options...
kimpybugalugs Posted August 4, 2011 Report Share Posted August 4, 2011 Had to do the hacksaw trick to remove the pivot bolt from the sleeve on the swinging arm. Anyone know the best way to get the old bushes out? Soak them in some noxious liquid, gasket remover, acetone etc? 1976 TY175. Thanks, Jon. This might be helpful: http://www.tytrials.co.uk/trailandtrialsuk/prod_49624--36-amp-89-Swinging-Arm-Repair-Kit-TY125-amp-TY175.html Link to comment Share on other sites More sharing options...
alan_nc Posted August 4, 2011 Report Share Posted August 4, 2011 Had to do the same thing. Try long drift from the other side. or use a Dremil with a burr bit and cut a slot in the nylon bush, should then just push out. Link to comment Share on other sites More sharing options...
yamty175 Posted August 5, 2011 Author Report Share Posted August 5, 2011 Thanks for the replies guys. Jon. Link to comment Share on other sites More sharing options...
sigwilk Posted January 14, 2012 Report Share Posted January 14, 2012 Thanks for the replies guys. Jon. I got lucky, mine came straight out - see http://motorcyclerestorations.blogspot.com/search/label/Swing%20Arm'>http://motorcyclerestorations.blogspot.com/search/label/Swing%20Arm Regards Simon http://motorcyclerestorations.blogspot.com/ Link to comment Share on other sites More sharing options...
postmanpat Posted January 16, 2012 Report Share Posted January 16, 2012 I don't know if i've dreamt it....but is there a landrover bush that fits the TY? swing arm?? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now