February 14, 201214 yr while the tank is off I intend to remove the switch gear and fit a kill switch presume I have to carefully split the loom and just leave the fan feed which wire is the kill switch wire from the cdi ?
February 15, 201214 yr while the tank is off I intend to remove the switch gear and fit a kill switch presume I have to carefully split the loom and just leave the fan feed which wire is the kill switch wire from the cdi ? No, you can yank the harness and get the forked jumper for the fan circuit from Splatshop on the cheap. Kill wire is the single lead, black as I recall, dependant upon yers. Edited February 15, 201214 yr by copemech
February 15, 201214 yr The kit for ditching the switchgear is very simple & easy to fit. Have a look in the pinned manuals at the top & you'll find the instructions to do it
February 15, 201214 yr Author The kit for ditching the switchgear is very simple & easy to fit. Have a look in the pinned manuals at the top & you'll find the instructions to do it great job got a harness sorted cheers
February 15, 201214 yr Author great job got a harness sorted cheers on second thoughts after looking under the tank I only need to cut and join 2 yellow wires and the harness is out, not hard to reverse although it will never be back on. so I will do this myself tonight and save a few quid, then fit a new kill switch
February 16, 201214 yr You don't own a Beta so why cut the wiring, it's pretty easy to make your own kit-the photos should be enough to go off
February 16, 201214 yr Author You don't own a Beta so why cut the wiring, it's pretty easy to make your own kit-the photos should be enough to go off agree didnt do the deed last night, but your right, a straight yellow with a jumper wire on one end is all is needed, the original red can be reused
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.