jcam Posted September 1, 2013 Report Share Posted September 1, 2013 went out on my 2013 sherco 300 today and it ran fine for about 3 hours then decided it didnt want to tick over? i drained carb, changed plug and did all basic checks i could. i hadnt been near water or wet mud. any help much appreciated. Link to comment Share on other sites More sharing options...
t-shock 250 Posted September 1, 2013 Report Share Posted September 1, 2013 You haven't cleaned the carb though, which is the first thing to do ! Link to comment Share on other sites More sharing options...
jcam Posted September 1, 2013 Author Report Share Posted September 1, 2013 sorry, meant to put drained and cleaned carb! Link to comment Share on other sites More sharing options...
nigel dabster Posted September 1, 2013 Report Share Posted September 1, 2013 did you adjust the tickover screw? Link to comment Share on other sites More sharing options...
jcam Posted September 1, 2013 Author Report Share Posted September 1, 2013 yes i adjusted them mixture and tickover screw Link to comment Share on other sites More sharing options...
copemech Posted September 2, 2013 Report Share Posted September 2, 2013 Many times a quick clean on a carb will not do! You gotta disassemble and blow out the jets and passages, possibly run a fine wire throu the jets to clear debris. Just saying. Link to comment Share on other sites More sharing options...
bputt Posted September 3, 2013 Report Share Posted September 3, 2013 Any sudden stops, big hits just prior to bike not running - sheared flywheel key? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now