betarick Report post Posted February 9, 2015 Hi all! Is anyone with a 2014 evo have any problems with water allways in bottomn of air box? And as anyone found a better way to route fuel pipe from tap to stop it kinking? Quote Share this post Link to post Share on other sites
vonhazza Report post Posted February 9, 2015 (edited) Hi Rick, There are some tips here on preparing a Beta for the SSDT https://trialsguru.files.wordpress.com/2014/03/ssdt-help-sheet-2014-evo.pdf that have some waterproofing tips, I have not seen a 2014 Evo fuel hose but could the problem be that the hose is too long? would cutting the hose to make it shorter get rid of the kink. Steve, Edited February 9, 2015 by vonhazza Quote Share this post Link to post Share on other sites
betarick Report post Posted February 9, 2015 Problem with fuel hose is that it goes forward between cyl head and lower side of frame through cyl support bracket then loops back on its self down to carb! It seems to kink here and its pretty near cyl! looking at 2015 parts diagram and that seems to have a different tap! Quote Share this post Link to post Share on other sites
dadof2 Report post Posted February 9, 2015 (edited) Yes, after many years of having leaky fuel taps it seems for 2015 Beta have decided to try something different. The reason the taps leak is slightly rough finish on the metal tap parts. It prevents the seals / O rings sealing. Polish off the roughness and the taps work OK. I have not looked at a 2014 air box but pretty well all previous Betas need extra sealing work to minimise water ingress into air box. Edited February 9, 2015 by dadof2 Quote Share this post Link to post Share on other sites
slicktop Report post Posted February 10, 2015 Put a 90 degree fitting about an inch past the petcock. No more kinks. Quote Share this post Link to post Share on other sites