March 28, 201511 yr Removed my kickstart from the shaft and out fell 2 washers? Looking at the GG exploded view it only shows one? Also is it right that the washer doesn't initially sit flat because of the bolt which fixes the actual lever?
March 29, 201511 yr You mean outside of the cover? THere should be a ''special'' spacer (part 16 below), and an allen bold. MT280226068 Than the kickstarter, than the seal which is inside the cover. Inside the cover there are two washers. 1 on top, one at the ''bottom'' THe kickstarter itself when taken apart actually has 4. Edited March 30, 201511 yr by crazybond700
March 30, 201511 yr Author CrazyBond700, Thanks for the reply, its the washers which are behind the kickstart lever itself which is in-front of the clutch casing, image attached. Whe you refer to "special" washer mine was just standard..... Ian kickstart.pdf
March 30, 201511 yr Number's 9 and 1 are inside the clutch case. Is this what you are referring to? There are no washers between the kick start and the shaft. --Biff
March 30, 201511 yr Like biffsgasgas says, there is none behind the kickstarter on the outside, just kickstarter and then the seal. Might some light additions to post above to make clearer. Edited March 30, 201511 yr by crazybond700
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.