lsjimmy Posted March 28, 2016 Report Share Posted March 28, 2016 Has anyone got a good way to wire in some heated grips for the Scottish that doesn't involve cutting into the loom, I used the headlamp feed last year but they didn't work properly they'd get warm but not hot, any info would be great and pictures would be even better. Link to comment Share on other sites More sharing options...
dadof2 Posted March 28, 2016 Report Share Posted March 28, 2016 I would look up the output of your ACG. It may be it does not have sufficient power to get the grips hot. Link to comment Share on other sites More sharing options...
chrisa Posted March 29, 2016 Report Share Posted March 29, 2016 You could buy a 12v Lithium battery. They weigh nothing and could be strapped to somewhere convenient (best of luck with finding that place though). Link to comment Share on other sites More sharing options...
chrisa Posted March 29, 2016 Report Share Posted March 29, 2016 I'm awake at 2:20am talking lithium batteries.....oh dear! Link to comment Share on other sites More sharing options...
crazybond700 Posted March 29, 2016 Report Share Posted March 29, 2016 (edited) I think the power is the problem. I can imagine (all the people lalal ) they take like 50W or something, which is quite much for a small bike with little lights etc. There are also gloves, with a battery to put in a pocket or bag, however I dont think there are any mx/trial like gloves. Edited March 29, 2016 by crazybond700 Link to comment Share on other sites More sharing options...
s.e.lucas Posted March 29, 2016 Report Share Posted March 29, 2016 Link to comment Share on other sites More sharing options...
aussiechris Posted March 31, 2016 Report Share Posted March 31, 2016 I'm pretty sure the alternator output is 160w. Without lights there should be plenty to spare. ECU and fuel pump should only need about 20w. Not sure about the fan but probably another 30w or so. If you're running the homologated headlight then that could be 35w plus tail light etc. Link to comment Share on other sites More sharing options...
crazybond700 Posted March 31, 2016 Report Share Posted March 31, 2016 I would not see another reason why the headlamp wiring would not work. Or the grips are just crappy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now