jml Posted July 1, 2016 Report Share Posted July 1, 2016 Hey all, The reach/brake switch holder on my Braktec front brake levers has started to back itself out, does anyone know what the goop is they put in there to freeze the bolt in place. I've been told it's not loctite, it seems to be a plastic/rubber substance. It's only to last me for a single trial on the weekend, after that I'll be buying a proper set of adjusters. Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted July 1, 2016 Report Share Posted July 1, 2016 I imagine silicon seal would do the job. Every trials rider has a tube of that lying around don't they? Or you could try PTFE tape. 1 Quote Link to comment Share on other sites More sharing options...
jonnyc21 Posted July 1, 2016 Report Share Posted July 1, 2016 A dab of the blue (not red) loctite should work well and still let you remove it when your done. The blue is quite good and still workable after dry without striping things. Good luck. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.