Jump to content

Sign in to follow this  
fantic tom

Carb Problem Fantic 305

Recommended Posts

I'm having some bother with my fantic 305, it will only run with the choke on. With choke off it runs up and down and and soot up the spark plug. Iv stripped and cleaned the carb and took off the reed valve and checked them and all looks good! The manifold lookx good too no ctacks ect. Any ideas what else I could check? Cheers!

Share this post


Link to post
Share on other sites
 

 
 

I'm having some bother with my fantic 305, it will only run with the choke on. With choke off it runs up and down and and soot up the spark plug. Iv stripped and cleaned the carb and took off the reed valve and checked them and all looks good! The manifold lookx good too no ctacks ect. Any ideas what else I could check? Cheers!

are you sure the pilot jet is ok? if there is the genuine dellorto carb fitted, it'd have a 2nd slow jet and circuit in the bowl. is this circuit ok?

Share this post


Link to post
Share on other sites
 

All looks clean I stripped i took them all out and blew them out with carb cleaner. It is a genuine dellorto carb.

Share this post


Link to post
Share on other sites
 
 

it'd be a air screw

 

this type of dellorto (oval inlet) is very difficult to set up. It has a really small pilot jet and this is hidden really deep in the body so most time it is blocked

 

Share this post


Link to post
Share on other sites
 

Sorted!  I changed an o ring on one of the jets and a bit of an adjustment on the air screw and it now runs brilliant!

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...