December 24, 20169 yr I want to refresh my Sherco specifically regrease wheel bearings, steering head bearings, and swing arm bearings. Are there Any guides, manuals, YouTube vids on the topic? I want to do myself but I have limited mechanical ability. You thoughts would be appreciated.
December 24, 20169 yr It is all quite straightforward for a mechanical mind, if as you say you have limited experiance can you give an example of what you do have experiance of ? I cannot be specific about a Sherco as I have a Gasser but removing the swingarm to clean and grease the linkage is not a job for someone with limited experiance or as is probably the case a limited toolset. Also head bearings are not easy to get to then you have to reset the 'clearance' . Have you got a club member or riding mate that has done their own maintainance that could lend a guiding hand ? Take plenty of photos as you go and take your time until you are familiar with all the parts Good luck Edited December 24, 20169 yr by collyolly
December 24, 20169 yr It's not hard work. Take photos when disassembly it can be useful on reassembly Lewisport usa have a good bit old manual that can help a lot http://www.lewisportusa.com/manuals/sherc_11-21-09/sherco_setup_and_lubrication_guide.pdf And is good having dogbone bushings before starting service. It's cheap and service will be perfect if you replace them. (16.18 and 16.19 on pag 19)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.