Everything posted by master68
-
2024 Beta Evo 200 Factory
Would like to hear from anyone who has a Factory 200 regarding if it’s hard to kick start. The 2024 200 Compression Ratio is 11.8.1. My current Beta 250 Factory has a ratio 9.1.
-
2024 Beta Evo 200 Factory
Would like to hear from anyone who has a Factory 200 regarding if it’s hard to kick start. The 2024 200 Compression Ratio is 11.8.1. My current Beta 250 Factory has a ratio 9.1.
- Raising Shifter
-
Raising Shifter
Did/does anybody raise the position of their shifter to avoid shifting into neutral?
-
Beta Evo 250 Evo Factory
Your right a cheap way to experiment. Thanks didn’t think of slow turn throttle.
-
Beta Evo 250 Evo Factory
I have the fast throttle.
-
Beta Evo 250 Evo Factory
Did anybody modify their Factory bike to make it less snappy, etc.
-
250 Beta 250 EVO - Amsoil Saber
Thanks for info
-
250 Beta 250 EVO - Amsoil Saber
Anybody use Amsoil Saber in their Beta trial bikes? What do you use as a premix? I am running non ethanol 90 Octane in bike.
-
2022 Beta Evo Fan Always Running
Pauls320. Dealer close,They are trying but not fixed yet.
-
2022 Beta Evo Fan Always Running
Thought it was fixed. Now the fan doesn’t come on. Frustrating!,,
-
2022 Beta Evo Fan Always Running
- 2022 Beta Evo Fan Always Running
Thank you for comments. Radiator was flushed and refilled with engine ice. Waiting for new sensor from Beta.- 2022 Beta Evo Fan Always Running
Need you thoughts. 2022 Beta Evo 250 Factory fan won’t shut off. Frustrating because bike has only 1 hour on it.- Jitsie Elbow and knee guards
I didn’t take care of my Jitsie guards. From the moisture last season, they are now hard, dry and lost form. Short of buying a new set of guards, does anyone have recommendations to refresh the guards? I can use them but they are not as comfortable as when new. Just wondering if other folks experienced similar condition.- Refresh 15 Sherco290 St
Thank you for your input.- Refresh 15 Sherco290 St
I want to refresh my Sherco specifically regrease wheel bearings, steering head bearings, and swing arm bearings. Are there Any guides, manuals, YouTube vids on the topic? I want to do myself but I have limited mechanical ability. You thoughts would be appreciated.- Rebound/dampening
Did anyone adjust the Factory Rebound Settings to slow down the rebound of the rear shock? If you did, did it significantly help your riding?- 15 Sherco 290 Opinion On Throttle Slack
Thanks for comments. This is my 3rd Trials bike.- 15 Sherco 290 Opinion On Throttle Slack
I have a 15 Sherco ST 290. Bike is performing well. I am soliciting your opinion as a trials rider. Do you have a little slack in your throttle? Or no slack at all. Bike was set up with a little travel in the throttle. I know it's a personal preference but I want your opinion. - 2022 Beta Evo Fan Always Running