March 7, 20215 yr Guys- I have most of the torque settings in a shop manual for a B model, but I don't have the torque setting for the 4 aluminum cylinder hold down female bolts. Anybody? these are soft aluminum with a hex shaped top (4 each) if that helps- Thanks in advance!
March 7, 20215 yr 1 hour ago, Tillerman6 said: Guys- I have most of the torque settings in a shop manual for a B model, but I don't have the torque setting for the 4 aluminum cylinder hold down female bolts. Anybody? these are soft aluminum with a hex shaped top (4 each) if that helps- Thanks in advance! Hi Mr T, PM me your e mail address again, and I can send you the torque settings chart for the TY250A.
March 7, 20215 yr Author 2 hours ago, Tillerman6 said: Guys- I have most of the torque settings in a shop manual for a B model, but I don't have the torque setting for the 4 aluminum cylinder hold down female bolts. Anybody? these are soft aluminum with a hex shaped top (4 each) if that helps- Thanks in advance! OK- with the help of Magesty- The torque setting for the 4 aluminum hold down bolts in the cylinder are listed as 4.2 to 4.5 m-kg this comes out to 30-32ft pounds of tonque on those aluminum tube nuts!! That seems like a lot to me- Soound right to you ?
March 8, 20215 yr 12 hours ago, Tillerman6 said: OK- with the help of Magesty- The torque setting for the 4 aluminum hold down bolts in the cylinder are listed as 4.2 to 4.5 m-kg this comes out to 30-32ft pounds of tonque on those aluminum tube nuts!! That seems like a lot to me- Soound right to you ? I figure that some people don't do them up tight enough because on a TY250D I bought, it developed a base gasket leak that stopped leaking when I re-tightened those nuts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.