Gasgas

[dave guppy]

hello,can anyone help me bleed my front brake as the lever is hard and the brake is crap,cheers

[betajitsie]

wind the adjuster rite off on the lever then pump the front brake a few times then undo the bleed nipple on the kaliper ,tighten the nipple back up and pump the lever agen , keep repeating this process ,be patient it does take a while

[gasgasthermo]

clicky check this out hope this helps Edited February 11, 2006 by gasgasthermo

[atomant]

clicky check this out  hope this helps 

<{POST_SNAPBACK}>

I havent got a Gasser but thats a great site for all riders. Thanks for the link

[trials-novice]

While your on the subject of brake levers, does any one know the height of a gas gas 125 from floor to brake lever / handlebars. I've looked on gasgas but it only tells you the height up to the seat.

Cheers ,

[jonty]

Air in the system tends to make the brake lever or pedal feel soft and spongy not hard. If your brake is'nt very good then check the state of the pads and that the pistons are'nt sticking in the caliper.Sometimes the residue from bike cleaning detergents can cause a problem.Ride round with the brake on and really warm up the disc then pour cold water all over the assembly.

Worth a try.