Jump to content

How To Stop Water Getting Into The Flywheel


gasgasian
 Share

Recommended Posts

 

My theory is that the water that appears on the inside of the flywheel is condensation from the inside of the motor. I have been through the 'sealing before every trial' route only to find water inside even after a 'dry' trial. Now the practice is to remove the cover after the bike has been washed, spray with a water repellant (WD40) and leave open until the next trial. It seems to work for me, but as usual I'm sure someone else will have a different theory!

Link to comment
Share on other sites

 
 
... i have drilled a hole or two in the bottom of it and slotted them... anything gets in it goes straight back out again.

What do you mean "slotted them".... do you have a pic? I've never really had a problem with water in the flywheel cover myself but I'm all for preventative measures!

Link to comment
Share on other sites

 

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
  • Create New...