General Trials Talk
General discussion on the sport of Observed Motorcycle Trials
5,526 topics in this forum
-
Hi all, ive got a gas gas txt contact 1999 and just started trials as a beginner. Are the older bikes that much heavier than say a 2005 year bike, the new bikes seem very slim, can they make much difference when you want to hop the front or rear. when you see the pros ride they make the bike look very light, would a pro be able to make an older heavier bike move like a new bike? Cheers Andy
-
- 13 replies
- 4.2k views
-
-
I spoke to the trials mechanic here who said he'd change the springs in the front forks for $30 each plus cost of spring ( not sure what spring go for?). I wonder if that's a cheap and decent solution to the bottoming out I get when doing small jumps? The damper adjusting didn't help. still bottoms out. Back doesn't bottom. this bike has 4 to 5 years hard riding on it, so I've read about giving it a "re-charge". What exactly is done? I need to give the rear suspension some life back? Can the gas inside be re-pumped in or....? I adjusted the damper knob on the rear both ways and it's hard to tell a difference. THANKS for your help. Let me know what you've done to your …
-
- 2 replies
- 1.6k views
- 1 follower
-
-
Has anyone gone from an X11 light or even X11 to a Dunlop and what's your thoughts?
-
- 12 replies
- 3.2k views
-
-
-
-
- 8 replies
- 2.4k views
-
-
New Trial Publication – what are your thoughts? We are currently exploring and investigating the Trial publishing market with regard to launching a new product into this specialist sector as part of a potential joint venture. However before the project can take the next step we wanted to get the thoughts and feed back from you – the potential readers. Trialscentral is without doubt the largest and best English speaking website, and T+MX remains the UK’s leading weekly off road journal. We are looking to offer a quality monthly magazine that would compliment these two established forms of media. The product would be a high end publication pack…
-
-
- 20 replies
- 5.2k views
-
-
"Well nearly" Couple of jobs to do, Testing and tightening. Enjoyed the refresh and now know the bikes ready for 2016. If you would like to look at the documented rebuild go to my Gassa 280 refresh POST. Have a fantastic new year. All the very best Deano.
-
-
- 6 replies
- 2.6k views
-
-
hi i have a 2000 sherco 250 and the chain is comming loose nearly every trial and i dont know why i unloosen it and the pull the wheel back and it works but then the next trial it comes loose does any one know what the problem is? thanks r.hayes
-
Thinking about one of these and there are two versions. One has a small diameter neck that includes a pouring spout, whilst the other doesn't. Does anyone know if the small diameter neck is still big enough to be filled easily from the spout of a plastic 5 litre spare petrol container, the general car type sold everywhere? Thanks
-
-
- 1 reply
- 2.5k views
-
-
-
Can anybody help me, i need insurance to get my bike registered. Does anybody know the cheapest insurance company for a trials bike? thanks
-
- 9 replies
- 2.9k views
-
-
-
I was just wondering is their anyone who run,s a trial,s training day because I really want to polish up my skills & learn to ride rock steps etc im living in burnley up north & wondered if anyone could help me out
-
- 6 replies
- 2.8k views
-
-
Hi we have a couple of bikes, Beta Evo 250, Oset 24R and now a great TY80 that my 15 year old lad Matthew will strip and rebuild to hopefully a nice bike. My questions for now how do I identity the year / model etc. I suppose really I should not but here is the Frame / Engine number 451-111511 And where's the best place for bits. Cheers Mark & Matthew
-
-
- 5 replies
- 1.9k views
-
-
Saw a post on here about an easy way to do this, bead breakers,driving over it with a van and spades, just had the Goat (Ryan) do a new Dunlop for me in under 5 minutes just using 2 tyre levers and a bit of carb cleaner. Saves me a job tomorrow and a load of sweat and swearing. If your reading this Ralph, hes saved you a job as well as no doubt I would have given up after an hour and brought it round your house to do. Looks like the secret to it is momentum and brute strength, the bead on the dunlop is very tough compared to the michelin but no problem for ryan
-
- 9 replies
- 5.1k views
-
-
I recently entered a medium distance enduro on my mates KTM exc 250f . The enduro had ten
-
- 7 replies
- 2.5k views
-
-
what are we suppose to use???????????? gas gas 280 2001????????????
-
- 7 replies
- 3k views
-
-
I remember seeing this on the internet a while ago. I think it was USA designed and built, but havent heard anything after about it since. If I remember rightly, it was designed as a pit bike toy rather than a kids bike Anyone know if they are available to buy anywhere ? It looks good and could be something to try for my eldest
-
- 1 reply
- 2.2k views
-
-
Hello all. Anyone has experience riding trials with Tech 3 boots on? Just thinking if they grip well enough? They are very nicely priced. Cheeeers
-
- 6 replies
- 3.2k views
-
-
hi im thinking of getting the apico rear sprocket for my beta. has any one thrid them? any good? also thinking of the iris trials chain. are these any good? max
-
- 19 replies
- 12.1k views
-