Introduce Yourself

Greetings and thanks for having me. Just acquired 01 280txt. Looking for manual, parts book, I understand it has diagrams for assembly. Also any info on what fits what; model to model, and which other manufacturers used this powerplant and extraneous pars. Thanks in advance

Hello, just heard that I can get back an old Bultaco that I used to own 35 years ago! It's in a bit of a state and is in bits but I am very happy to see the old girl again, but I'm going to need some advice and so here I am. Live in Scotland in a rural quite place with lots of places to play. Will have loads of questions I'm sure.

Hi everyone. New to trials,been riding a 2009 Gasgas 125 txt for a few months. Just upgraded to a 2015 Sherco ST300 Factory.

Just looking at getting into trial riding. Based in Ross-on-Wye so looking for local clubs, venues and general info at the moment. Cheers Arron

Hello all from sunny Grimsby just getting myself back into trials and fancied something a bit older than the bikes i used to play on. Got myself an old 1956 Ariel NH 350 (well the main bits) to build up and ride. Though i had better say hello before picking brains etc.

Got a 2018 Montesa 260 4RT pulled it out of the garage last week & it kicked over first time let it run for 10 minutes, turned it off then kicked it over It started 1st time again let it run for a bit and ooking at the tacho it was running at over 2000 rpm so I turned the screw in a touch so it was running nicely at about 1850rpm at the same time I tucked the wiring that runs from the ignition behind the clip under the regulator...... turned it off then when I came to restart it wouldn’t start, did the reset, still wouldnt start so I looked at that wiring from the ignition & took off some loose electrical tape & pulled it out from…

Looking at this sub-forum I think Konrad might be single handedly reviving Trials Central 😆 I am new to moto trials but have been riding bike trials for much of my life. I currently ride a 2014 OSSA Factory R that I purchased from my dad and am in the process of fixing up. I actually found konrads website ossa-efi.com which lead me to this forum. I am excited to be here!

Hi to All, Here Matteo from Italy! an enthusiast of engines and mechanics. I'm full rebuilding a 2012 Ossa Explorer 280i! I have always considered it a particular and very interesting tech bike.. I found one at a good price and so I decided to rebuild it! I found a lot of interesting information in the forum and I hope I can be of help to others like me who are looking for information I would like to open a rebuild topic to leave a mark on those like me will try to do something like this Matteo

Hello; new member living in Ma. USA; 70 years old now and returning to riding; rode quite a bit of trials bikes in the 70s; including Bultaco, Ossa, Montesa, and 1976 Yamaha TY175; I’m restarting now on the same 1976 TY175; I think this will be the lightest and easiest handling for a guy my age; excited to start again and enjoy my ride of the old days! Thanks John

I'm looking a getting a seat for my 04 Ty 4, I've found one designed for a SY wondering if it will fit ok? Supplier wasn't sure. Thanks for the time reading this

Hi, I’ve just joined the forum as I’m completely obsessed with the Panther Stroud and I’ve been lucky to pickup a genuine Stroud motor for my trials project! Now I’m looking for a Stroud petrol tank ( rocking horse s**t!!) my particular obsession is with the alleged Springer Stroud that was built and sent to Sweden in around 1953!!

Hi guys n girls! I bought my tiger cub (1961) in the Dalesman frame, looking to replace the swing arm bushes ? Anybody know where I could get parts for that type of frame from? I’m in Isle of Man UK , I’m told it was owned by Andy Minns ? He did the SSDT on it ? Be great to know if this is in fact true ? cheers Don

Always wanted to ride trials, but never have. My hobby is old motorcycle restoration, typically British. Past years raced vintage MX on a 1967 Husqvarna 360, stopped in 2005. Now wanting to ride a 72 Sherpa T model 92. recently purchased a Sherpa Bultaco in progress, due finished by early 24. I am 76" tall at 175 lbs and I have my first helmet from 1969 (no foam/all failed). I am concerned about being too tall for this sport on a vintage Sherpa. Also concerned about going back to kick start.

Just thought I’d share this as it might help others just done oil & oil filter change on my 4RT & like others struggled to get one of the front bolts to line up on the skid plate when refitting it so I loosened the down tube bolts on the same side a little & also the long bolt that goes through the bottom see photos & it lined up so I just tightened them all a little at a time until all were secure hope this helps

Hi all iam restoring a 1968 montesa cot 250 I have the matching engine and frame numbers and I want to register it for the road and iam told that I need a dating certificate how do I get one ? Thanks

Hi all new from Ponta Delgada, Azores Island. I have two Bultaco Sherpa T bikes mod. 124 and mod. 159 in my barn and will start to rebuild it in the next time.

Hello I'm new to the forum ! I'm not new to motorcycling though ! I recently purchased a 1982 Honda Matise MH200 ,fully restored . And I'M trying to get it road legal ! It looks to me to have all needed for MOT , lights, speedo, side stand , horn , brake lights . Bernie

Afternoon all, new to Trials, old dog ahrma guy like 28/30 years. Retired police man and deputy sheriff OREGON and Calif. I’ve been working trials for ooo 20 years. I help my friends set courses in the PNW, flag sections when available. I’m a VMX racer at heart, my backs trashed, two hips replaced, spines rebuilt, theirs more, trying not to depress myself. anyways the good stuff. I own a few Trials bikes, all twin shock. 1976 TL125 Honda “ stock” 1976 TL 150 Honda in a Mic Andrews “ Tall Boy Frame swing arm and triple clamp. 1975/6 TY 175 Yamaha I’m rebuilding. 1986? Honda 200 TLR, with much cool guy kit on it already. Purch…

Alright chaps I have always had bikes but not trial bikes so just looking at getting a entry level bike eying a Huskqvara FE250, also do many of you belong to the TRF group

Hi, Im Hugh & new to the group. I’m just beginning to build a cub from scratch. I have a good frame & forks but want to upgrade to 3ta type. Any recommendations would be appreciated as to suppliers. Thanks.