I have a TY250 mono with a pro monty front pipe and sammy miller back box and rebored to 261cc with wossner piston, just wondering if there is a carb upgrade from the original as can not get it to run right always running on when it gets hot tried cleaning carb out I have left jetting as it was.
Hi just wondering if this years event has been cancelled due to Covid-19 as Trial GP website doesn't but World Trial 2020 website does say its cancelled
Hi there i have a 2016 300 with a Keihin Carb and 48 Pilot Jet and 128 main jet standard needle and needle set in middle and air screw at 1 1/2 turns out, but it seems to run on slightly sometimes i am thinking its running weak
Yes you should be able to ride around before the start but not the sections.
I would take 1 can of petrol with you.
If you come and see us there we will sort you out and my dad will run the bike with you. We are in a big Blue Renault Master with Holmestead on the side of it. (Reg EY08 DCE) We will be there from about 9 - 9.30 ish. it starts at 10.30/ 11am
I've just changed my carb settings now, left the pilot jet at 45, changed the main jet from a 125 to a 128 and needle setting to 1 up from bottom, going to try this setting at trial on Sunday (Lincoln). hopefully this setting should be ok.
I was going to get a 250 but I tried a 300 at demo day, and thought it suited me more, they are easy to ride, good on power. if I was you I would go for a 300 but try it first
Hi, I've just bought a 2016 300cc and I was wondering what the mixture screw turns should be so its set right for me its a kelhin flat slide carb on it
Hi There. I have fitted 1 to my 2011 sherco and all you have to do is extend the wires, the wires on the end of the switch need to be male, 1 to earth, the other 1 to the cdi wire which is a cut out wire.
Hi there, I was wondering if anyone knows what length the forks should be from the top of the top yoke to the centre of the wheel spindle, on my dads Drayton bantam.
Hi, I was wondering if anyone knows what the air mixture should be (How many turns out) on my bike, and I have also fitted a s3 titanium front pipe do I need to change any jets.
Hi everyone, I've Just bought a second hand X Light, but it has 2 sidewall cuts, it takes a week to go down. should I change to a different tyre or just keeping blowing it up.
may 2015 is a long way off. for a new comer on a bantam i'd be applying but expecting not to get an entry pre 2018. from your location i d be getting down to poachers who run plenty of p65 trials or take a trip on the m62 to any yorkshire classic event ( 19the jan is the first round of the 2014 champs so all the best bikes will be out including about a dozen bantams..)
just ask any YCMCC bantam rider and the hat full of others who are building bikes what you need and who can get/make if for you
My Dad is not a new comer on a bantam he has been riding Pre65 Trials since he was 40 and he is now 57, plus he has rode plenty of poachers trials, which are good trials to ride.
Hi there my dad is looking to ride the Scottish Pre65 in 2015 but he needs to sort out the forks on the bantam, can anyone tell me what forks to use or what forks you turn down to fit Triumph 3TA fork bottoms and what yokes to use. cheers
Hi there i have a 2011 sherco 250, the problem you are having could be an air leak between the crankcase manifold and the carb try that, to find an air leak spray brake cleaner on the manifold then you will know.
Yamaha TY250 Mono Carb upgrade
in Aircooled Monoshocks
Posted
Hi,
I have a TY250 mono with a pro monty front pipe and sammy miller back box and rebored to 261cc with wossner piston, just wondering if there is a carb upgrade from the original as can not get it to run right always running on when it gets hot tried cleaning carb out I have left jetting as it was.
If there is a carb upgrade where to buy one from