Jump to content

l05tb0y

Members
  • Posts

    52
  • Joined

  • Last visited

Everything posted by l05tb0y
 
 
  1. You do when you cant get the pads in and you have to take the calliper off.
  2. Hi all, I've changed the brake pads on my 2004 sherco but I can't seem to bleed the rear brake. Any tips would be cool. Thanks Dave
  3. l05tb0y

    No Filter

    So what's the best way to bleed the rear brake.
  4. l05tb0y

    No Filter

    I will soon I hope, I've changed the brake pads and I had to remove the callipers (don't ask) and now I can't seem to bleed the rear brake.
  5. l05tb0y

    No Filter

    Well I've checked the carb and took the exhaust off looked in the hole with a torch and the piston and barrel looks good
  6. Hi im new here too and would be interested in some lessons, can you pass on the number to me for warden Law. Thanks
  7. l05tb0y

    No Filter

    Cheers for the replies. How do I clean the crank case and cylinder out, is that an engine out job. Im giving it a service anyway, oil change, filters, coolant, brake fluid and gearbox oil and new brake pads.
  8. l05tb0y

    No Filter

    Just found out that the bike I've just bought has no air filter and I don't know how long the last owner has been riding it like his . What damage should I look for and I presume I will have to take the carb off and clean it. Is their anything else I should do. New filter has been ordered, Thanks Dave.
  9. l05tb0y

    Workshop Manual

    Hi all im new to the site and trials, is their such a thing as a Haynes Manual or similar for a 2004 Sherco 250. If so where can I get one from . Thanks Dave
  10. Yes I will do soon but I want to get used to riding a trials bike. I've never riden one before and want to get used to the gearing and balance and other things.
  11. Hi, I am Dave from Wallsend Newcastle area, I've just got myself a 2004 sherco 250 to learn/practice on, Any tips would be great. I've just about always had motorbikes since I was very young (not so young now lol) mainly road bikes and crossers so I thought I would try a bit of trials riding. So any tips on riding or even to keep my bike running ok would be cool. Also is their any place I can practice my riding in the Newcastle area. Thanks Dave.
  12. Hi, can anyone give me the directiond to the DMC Trial today at Valley Fram, Oxenlaw, near Castleside., i will be coming from Newcastle. Post code would be handy if their is one. Thanks Dave.
  13. Hi all new here and new to trials, ive got a budget of around
  14. I dont know if this will help but i had a YZ 250 that done this, what i was told to do was the night before your ride out pull the clutch lever to the bars and zip tie or tape it to the bars all night. Next morning it was fine. Hope this helps
  15. Im a bit of a noob but how do you get on the Bedlington facebook page
  16. Hi all im Dave from Newcastle England, just joined the forum as im in the market for a motorcycle trials bike. Ive had bikes most of my life but ive never dony any trials riding so im gona try my hand at this. My budget will be arround £1000 but the cheeper the better as i might not like it. ps. what makes of bike is the lightest so therefore easier to throw arround, and also any advice as to what model would be best for me. Thanks Dave
 
×
  • Create New...