Jump to content

hamill_glen

Members
  • Posts

    26
  • Joined

  • Last visited

Posts posted by hamill_glen
 
 
  1. Out on the bike today and I notice the bikes was losing a good amount off petrol from the over flow on the carb !so went back the the van and took the carb apart and cleaned the jets etc and put all back together and worked fine . Then after about 45 mins same thing happened again ! Back to the van etc striped carb apart cleaned it put all back together n still the same problem . Tried that coulple more times and it kept losing petrol even when the bike wasn't started . What could the problem be ?

    (2013 sherco290 )

  2. Have recently changed the master cylinder on my sherco to ajps . And put a new set of front break pads on to but keep having problem with the front breaks sticking . I've managed to free the Pistons but they just keep sticking on ! Anyone able to advise me on this problem ?

  3. am just after fitting the clutch lighter the shedworks sell . After fitting it and adjusting the clutch etc I started the bike up pulled the clutch in selected first gear n slowly let the clutch out but nothing happened ?? Any ideas

  4. started the bike up early for the first in a week bike ticked over for a while then I stopped it . Left it sitting for a while and went to start it again and nothing happened ! The plug was done . Went and got new plug from the shop put it in and hit a kick and it started right away . What would be causing this problem ??

  5. wondering has this happened to anyone before ? We're the bolt screws into ,to Hold the flywheel cover on has broke away . I still have the bit that broke off , I have been gluing it back on but it just keeps breaking again . What can I do ?

    post-21538-0-54014800-1438242835_thumb.jpg

 
×
  • Create New...