Jump to content

hamill_glen

Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by hamill_glen
 
 
  1. What mods can be done on the 290 to give it bit more Proformance!
  2. Heading down the watch the Scott trial next month for the first time and wondering were about am able to spectate from ?
  3. Yea lockie I have fuel filter fitted between tank and fuel pump
  4. Out on the bike today and I notice the bikes was losing a good amount off petrol from the over flow on the carb !so went back the the van and took the carb apart and cleaned the jets etc and put all back together and worked fine . Then after about 45 mins same thing happened again ! Back to the van etc striped carb apart cleaned it put all back together n still the same problem . Tried that coulple more times and it kept losing petrol even when the bike wasn't started . What could the problem be ? (2013 sherco290 )
  5. Have recently changed the master cylinder on my sherco to ajps . And put a new set of front break pads on to but keep having problem with the front breaks sticking . I've managed to free the Pistons but they just keep sticking on ! Anyone able to advise me on this problem ?
  6. Managed to get it done by back bleeding them . Worked first time ??
  7. There new master cylinders . Will give the back bleeding them ago later .
  8. Have just swapped over to ajp master cyclinders on my 2013 sherco . And not getting any presser in the front brake ? What could the problem be
  9. Think I'll just be changing the master cylinders ! As not to keen on the standered ones .
  10. Just wondering what other leavers are available for the 2013 model
  11. Just bought myself a sherco and wonder what carb settings other people are using ? And any other maintence tips for the bike Thanks
  12. Sorry for got to say returning from Australia
  13. Planning on return to live in the uk some times this year and hoping to bring my two trials bikes with me . Was wondering if anyone has done this before and did they have much hassle when the bike arrived in the uk ?
  14. Wondering what size of bars people are using on there tlr Thanks
  15. Looking for a second hand barrel for my 200 tlr .
  16. just wondering what's the best replacement carb for the tlr 200 ? Or am I better to rebuild the original one ? (Not reflex)
  17. Just seeing this post now . Am after the kit to rebuild the original carb . Had a look on that website but it's listed for reflax tlr 200 will that be ok in my Tlr as it not a reflex
  18. Thanks for the advise . Got it sorted thanks
  19. am just after fitting the clutch lighter the shedworks sell . After fitting it and adjusting the clutch etc I started the bike up pulled the clutch in selected first gear n slowly let the clutch out but nothing happened ?? Any ideas
  20. just wondering were I could order complet OEM carburetor kit for my bike ?
  21. Thanks I'll be sure to get that looked at . The bike has a new filter on it
  22. started the bike up early for the first in a week bike ticked over for a while then I stopped it . Left it sitting for a while and went to start it again and nothing happened ! The plug was done . Went and got new plug from the shop put it in and hit a kick and it started right away . What would be causing this problem ??
  23. wondering has this happened to anyone before ? We're the bolt screws into ,to Hold the flywheel cover on has broke away . I still have the bit that broke off , I have been gluing it back on but it just keeps breaking again . What can I do ?
 
×
  • Create New...