Jump to content

badger360

Members
  • Posts

    89
  • Joined

  • Last visited

Posts posted by badger360
 
 
  1. I was told last year that they would have a bike ready by september for the milan bike show they were a good bike but feel like time may have run out and sherco and trs have taken there place ,parts are still around for the bikes but how long will that last.

  2. Think it goes by the number printed on the spring I had the yellow spring on my ossa and replaced it with a harder spring which was also yellow splat shop web site will tell what spring you have on your bike.

  3. Yes trials and tribs are very good they know there stuff ,sound like the tps needs re setting or clean the tps connection to the throttle body or could be a loose connection to the fuel injector check all your plugs what year is the bike

  4. 11 tooth front may cause the bike to push in the tight sections a 10 tooth is much better ,its the same as 4rt owners most change the gearing to a 9 tooth front sprocket ,the ossa does have a lot of power and this will calm it down a bit .

  5. Ok- not wonderful, but actually quite functional. I have not added the taillamp/lisc plate holder yet. I'm going to use one like on my AJP.

    I may try another slightly different method- once piece sides and weld the top on instead. (maybe I'll get some more practice welding sheet aluminum and it will look better also)

    OSSA%20alum%20fender%201_zpsjhkp3ylw.jpg

    OSSA%20alum%20fender%202_zpsvsrmrmhf.jpg

  6. The 16 sherco has a keihin carb aswell,had a beta in the past and the sherco is a better bike got a 16 300 st at the moment and the jetting is spot on the keihin carbs are not hard to set

    • Like 1
 
×
  • Create New...