stevenbb4

Hello all, can any one tell what toque the cylinder head screws should be tighten to on a 280 Pro, I am sure I read some were it is 18 lbs. But my local mechanic recons that to high for light alloy,any ideas.....steve

Hello, can any one recommend any thing to de coke an exhaust, the Header/down pipe of my 280 in choked with carbon, i can scrap a lot any with a scrrew driver but need some thing to reach round the bend. Thanks Steve

Hello, can any one recommend a good UK Scorpa Spares dealer and how much might I pay for a rear mud gaurd for a 98 easy, .......Thanks steve

Hello all just got my lad a 280 easy 98 model ,can any one give me some advice re: best gear oil, spark plug, what pre mix,or just any info ,cant find much on the web, can any one point me at any good scorpa info sites. thanks steve

Some thing you could of told me YESTERDAY!!!!!!!!

Orderd one today fron gasgas uk

Hello all Has any one had to buy the dc converter which fits between the fan and the thermastat its a small inch square black box that boost the power to run the fan, I think mines bust and may need a new one . I would just like to know what kind of money i am looking at, saturday aftet noon and gasgas uk is shut

Whats the best way to strap your bike down when using a trailer, what are the best parts of the bike to strap from/to . every time I go out the bike ends up on a slant and I have to re tie in down. Thanks for any suggestions

Rebuillt my sons 2000 TXT 280 top end and just need to torque down the head and barrel can any one give the correct values . I can't remeber were but I am sure I read 18 lbs for the head but that sounds a lot for a 6 mm bolt in to ally. Thanks for any help you can give.

Thanks Guys I'll put the forks back together with care, spot on with disk price

I

Has any one heard of a flywheel mod for the pro? . Some ones selling a pro on Ebay, and in the listing he says,

My 03 280 pro has developed a problem finding second gear from neutral, when in neutral it will easily go into first and then second whilst moving but will not go in to second from neutral when stood sill. Once in second all other gears work fine, up and down the gear box no problems, it

Hello all Pulled the top end of my son's rattley 280 TXT and it's badly worn, going to pop it off to Langcourts next week for a replating. I was having a quick look at the con rod and it has no play up and down but a bit left to right, any body had a crank rebuild? Can it be done at home or do the bearings have to be pressed in, how much are new crank bearings and seals here in the UK. Any info welcome

Thanks Stuart i'll get one ordred in the morning Steve