jorgep978

my sherco done this and it was the crank case seal. the symptoms were a white cloud of smog being belching out from behind me. also i measure the new oil before putting it in then when i came back i drained it out and measured it again i noticed there was a lost less. Try it.

Hi i had a stator problem bike ran backward and dogey spark and not reving out could be the pick up sensors. I think your problem is more than likely be the head gasket or timing. its hard to judge without hearing the bike. Hope this helps Good luck

Hi guys cheers for all your trials help and support but turns out it was my stator coil something to do with the charge and source coil now behind the bars and going forward from now on (((( hopefully! )))). Im happy to help any one with the same problem!! Cheers Jorge

Tryed to flip the coil over but there is only one way it goes together and i had marked the plate before removing.

Hi and thanks i have sent the coil back to the guy he got the ohms wrong im sure its 400-450ohms he put 300ohm dont know if this has any thing to do with it but he is going to give me a full re-coil for FREE! thank you all very much for your help

Hi guys just wondering if any of you have had the same problem. I Got my stator coil re-wound put the bike back together with correct timing markings, it took ages to start when i got it started it gave kick back i then put it into gear and the bike was runing backwards so cheked woodruff key and timing again (all good). Tryed it again but no luck i even tryed retaring the timing a little but still the same. Dont have a clue what else to do!! Any help would be very nice Thanks Jorge.