jandyb

Tried to remove the front bolt. Got the lower mount closer, but not close enough. And then it was way out of line in front. Havent found any cracks anywhee..

Heres what it looked like before removing the motor first time:

What would that gain? It was like this before taking the skid plate off. Was like this when taking the motor out the first time too. Hence why the mounts were broke in the first place. -Jan

So what happens? Bendt frame? How do I get it ... ehh not straight .. correct? Bash plate does not fit anyway -Jan

My brother came along to discuss this, and thats what we ended up with. Must be a fabrication error this, and proably the reason the engine cases broke in the first place. If something has bendt this would have been looking different I think. Well... must find a good mechanic then.. Jan

Finally working on the cracked engine case from early this summer. Bought a new alu cases and have moved everything over exept for some new bearings. When putting the engine back into the frame this is what I get. Rear and front bolt in place, but the middle bolt hole is at least 5 mm out of line. How do I deal with this?

Thanks guys. Sure it is the magnesium halfes. I dont know if I will bother try to find someone to weld. Ill go for the alucases. They are not "That badly" priced, and will do the job. Beeing the 2012 Raga it of cause has the retractable gear shift axle. Anybody know the part number for the right half? I was thinking about using a washer for the oval hole in the frame. If I find a perfecty sized one it should just be to put it in and bolt.. -Jan

Heres how it should look like...

Da**** Shercoben!! You beat me with seconds there..

Only thing I can remember is plastic/nylon inside there is the stopper for the kickstart. I doesnt look like that, but beaten enough i can imagine that it will become like this.. -Jan

Dont need lead in airfilter when the guy on top weighs almost 100 kg.. :-) No I dont have a story for this.. Bought the bike may last year only 6 month old. A 2012 Raga 280 btw. First owner was one of the elite guys. Shouldnt surprise me if the crack has been there all the time. What I found out later today is that the swingarm bolt was loose, and that the hole in the frame has become oval. Dont know if that is the cause of the crack, or because af the crack.. Anyway the bike is a wreck until this is fixed.. Anyone got a good advice for the oval hole in the frame? Now its time for a beer.. Cheers -Jan

Both sides!! Only one solution for this I am afraid, but is it smart to use it before fix? Is there anything other that can break? -Jan

Oil preferences? Have you tried a search in this forum? Try, and you will find some hours reading. Its one of the most discussed topics.. :-) My preference btw is GRO gear extreme 75 -Jan

Aha... sorry.. Jons method works perfect.. -Jan

You mean a circlip plier?