ricklound
Members
-
Joined
-
Last visited
Everything posted by ricklound
-
Vertigo head inserts are made by S3. I understand the DL12 250 has got the low compression head which is Vertigo part number V-0616. The insert on my DL 250 has got S3 part number ST-0616 printed on it. Vertigo part number for 250 high compression head is V-1027. Looking on the 2020 vertical 250 parts diagram, it lists 0616 as the part number for your head. So you may already have a low compression head. High and Low compression inserts for the 250 are also available from splatshop: https://www.splatshop.co.uk/s3-vertigo-jtg-cylinder-head-inserts-fits-original-head-250-300cc.html hope that helps
-
Hi, Does any know if a trials bike will fit in a SWB VW Transporter T5 / 6 Kombi (i.e with 2 rows of seats) with the VW ABS plastic (Motexion) Bulkhead fitted behind the rear seats? Got a T5 just now and a single bike fits ok diagonally without the bulkhead, but can't find any info on the load space with one fitted. Thanks in advance for any info provided.
-
Great weekend at this years Highland Classic 2 Day - Thorpe Edition trial held at Alvie. Weather was kind again this year! Links to my photos: Sat: https://www.flickr.com/photos/83925364@N00/sets/72157644672646567/ Sun: https://www.flickr.com/photos/83925364@N00/sets/72157645087255285/ Sorry, not many photos taken on the sunday due to back marking duties!! Hope you enjoy Rick
-
Some of my photos from the Highland Classic 2 Day trial can be found here: Sat: http://www.flickr.com/photos/83925364@N00/sets/72157634031817433/ Sun: (links also posted on IDMCC website). Hope you enjoy.
-
Hi Photoboy, The starting procedure i used for my rev3 was: 1 open fuel tap 2 open choke (only required on cold days, would often start without) 3 throttle closed (i think that full throttle shuts of the fuel completely - but i could be wrong) 4 find compression on lever, kick hard as possible / repeat - giving small blip on throttle until it fires 5 blip for couple of seconds and shut the choke (if used). 6 then ride... If that doesn't work i would whip the carb off and give it a good clean. Good luck.
