Jump to content

434 - Engine Vin ?


mtna_buzz
 Share

Recommended Posts

Hey all, I have two '74 TY 250's one with frame/engine VIN that match (the full 434-000245) and one with the full frame vin (434-015952) and no number stamped on the motor case pad. It has the factory raised fins in that area (hasn't been modified)- just no stamping. Both of these bikes are original - no indication that they were ever used for more than recreational riding.

Also, the barrel on the one with no numbers also has fins all the way around (above the exhaust port) while the other has a gap in the fins in that area. both of these are the full wide case early models.

I'm just curious about the lack of a vin stamp/barrel changes in the one - is it common for these to not have a case vin? From the frame # it's about 15,000 behind #245. Does anybody know how many of these were produced in each year?

My first bike was a TY 80 in '75 and I couldn't pass on picking these up last summer - it's been a lot of fun riding/wrencing on them since!

Thanks for any info -

Jim

Link to comment
Share on other sites

 

 

I think Japanese home market TY250 Yams didn't have engine numbers stamped on the cases, so if it has been brought in from Japan at some stage that may be the reason for no engine numbers.

Link to comment
Share on other sites

 

This may help you with your TY250 cylinder ID. The first TY250 twinshocks (sold here in 1973 and 1974) were called TY250 and had engine and frame numbers that start with 434. These tend to be called TY250A nowadays. The stand is on the frame, the tank is steel, there is a TK carby, the bashplate was fibreglass and they had the bulging engine covers.

I suspect the next model was not sold everywhere in the world but here in OZ there is a model that was released in 1975 we call the TY250B that also has an engine number prefix of 434, but the frame number prefix is 493. The B model has an aluminium fuel tank, the stand is on the swingarm and they had a black Mikuni carby.

The relevant bit here for you is that while the A and B models both had an engine prefix of 434, the B model cylinder finning goes all the way around the front above the exhaust, while the A model cylinder has a wide gap in the finning there.

Later model cylinders (1976, 1977) have full width finning all the way down the cylinder.

I've heard annual sales of TY250, 175 and 80 were around 30,000 throughout the mid 1970s.

Link to comment
Share on other sites

 
  • 15 years later...
 
5 hours ago, Johnnyty said:

I have a Ty 250 serial number 434-007144 it has chrome fenders and chrome rear rack. Anyone know anything about it?

With that number, it started out as an A model TY250. Hard to say more without photos

Link to comment
Share on other sites

 
 
 

If I remember correctly, Yamaha made a version of the TY 434 to be use on farm i.e. more trail oriented. Does it have the foward footrest ?

Guy

Link to comment
Share on other sites

 
13 hours ago, Johnnyty said:

Yeah I’m in US haven’t seen another Ty with chrome fenders they’re definitely stock 

Maybe it's a trailbike of the era with a TY250 motor. Is that number you posted the motor ID number or the frame ID number?

Link to comment
Share on other sites

 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...