littleblackflash Posted December 20, 2009 Report Share Posted December 20, 2009 Hi, I need a 12mm swinging arm spindle to complete my 1972 Bultaco Sherpa. Bultaco UK don't have any and don't know when they will make any? Alternativley, any one know someone who could turn down a 14mm spindle? Link to comment Share on other sites More sharing options...
feetupfun Posted December 20, 2009 Report Share Posted December 20, 2009 Options 1 Buy some 12mm threaded rod from the hardware/building supply shop 2 Theres a person making stainless steel replicas of many old Bultaco screws, plugs, axles, nuts etc and advertises on eBay 3 Any machining business could thread the ends of a piece of 12mm steel rod for you Link to comment Share on other sites More sharing options...
wayne_weedon Posted December 20, 2009 Report Share Posted December 20, 2009 Which model? from M10 to M80 used the same part. After that a headed type and then changed to 14mm but forget which model the change over was. Wayne.... Link to comment Share on other sites More sharing options...
myson Posted December 20, 2009 Report Share Posted December 20, 2009 Hi There has just been one listed on ebay today, worth a look, Myson Link to comment Share on other sites More sharing options...
lee harris Posted December 20, 2009 Report Share Posted December 20, 2009 post the dimensions up here I haver loads and don t know which bike they are from L Link to comment Share on other sites More sharing options...
rcgods Posted December 20, 2009 Report Share Posted December 20, 2009 (edited) Bultaco Swingarm Spindles M91 Early Style - Two Nuts Length – 240mm Threaded length – 12mm either end Thread Pitch – M12x1.5 Thickness – 12mm M91 Later Style - Headed type Length – 235mm Threaded length – 10mm Thread Pitch – M12x1.5 Fixed head end Head OD – 17.8mm Head thickness – 4mm Flat - 10mm Measured on my own bikes. Edited December 20, 2009 by rcgods Link to comment Share on other sites More sharing options...
johnyboy Posted December 20, 2009 Report Share Posted December 20, 2009 you could try ellastone off road(01889 590186)the y recently brought 70 bultacos plus lots of spares in from the states Link to comment Share on other sites More sharing options...
littleblackflash Posted December 20, 2009 Author Report Share Posted December 20, 2009 Thanks all I brought one of Wayne Weedon who sells on ebay as fdosdisign. Just need him to finsh a needle roller bearing conversion for it. Link to comment Share on other sites More sharing options...
wayne_weedon Posted December 20, 2009 Report Share Posted December 20, 2009 Didn't know littleblackflash was you Duncan! But then I do keep my social activities on here and my business totally separate. Wayne..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now