Jump to content

Evo Mudguard Mesh


5again
 Share

Recommended Posts

Any hot tips on how to make it stay stuck. The OEM sticky stuff gave up pretty quickly and household silicon just doesn't seem to bond with the smooth underside of the guard, reverted to duck tape for now.

Link to comment
Share on other sites

 

 

Hot glue gun as above also been practicing with plastic welding kit (hot air) with which you can carefully remelt the OEM hot glue ..maybe a good hair drter would achieve same result?

It's high time Beta made a 2 part rear mudguard assembly maybe like Gas Gas

  • Like 1
Link to comment
Share on other sites

 
 

Have used SuperGlue to glue the OEM stuff back onto the plastic and use a series of small plastic grip clamps (and grease proof baking paper) to hold in place for a while and have also used hot glue gun to reinforce or extend OEM stuff. The SuperGlue works best if the OEM stuff is already lifted but be careful and only use little bits - it really is a case of more does NOT equal better and you don't want it running through the mesh onto the other side. Annoying to have to do this on a brand new 2012 bike.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...