expat_boy Posted December 16, 2013 Report Share Posted December 16, 2013 Replacing the fork seals on my gas gas 200 year 200 (i think) and have taken the foks out of the clamps. Just wondering how to take the caps off the tops and bottom bolts and in which order as i cant get any grip on them..... cheers Quote Link to comment Share on other sites More sharing options...
tltel Posted December 16, 2013 Report Share Posted December 16, 2013 put the forks back on the bike to undo top caps, then remove from bike. Don't over tighten clamp bolts, the clamps do snap. not sure on your actual forks but the bottom bolt can be undone with an air gun or battery impact gun, (assuming the internal is spinning) make sure you clean out the head of the allen bolts so that tool fits all the way in. TLTEL Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 16, 2013 Report Share Posted December 16, 2013 http://www.youtube.com/watch?v=_PMt6GoKk0Y Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted December 17, 2013 Report Share Posted December 17, 2013 Put it all back on the bike and then compress the forks with a strap to prevent the internals spinning - should let you undo the damper retaining bolt. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.