robson Posted July 12, 2023 Report Share Posted July 12, 2023 (edited) Hi, So far I was riding without any adjustment from the factory but idle is definitely too fast like 2400 rpm. I turned air screw out 1.25 as in manual and was trying to adjust with the idle screw to stated in the book 900-1100RPM but if I go that low bike starts to die. What idle do you run? Edited July 12, 2023 by robson Link to comment Share on other sites More sharing options...
Strutty Posted July 12, 2023 Report Share Posted July 12, 2023 I think its the air mixture screw which is normally between 1 - 1.5 turns my idle screw was set afterward to a comfortable level just above stalling, certainly isn't screwed that far in Link to comment Share on other sites More sharing options...
robson Posted July 12, 2023 Author Report Share Posted July 12, 2023 thanks Link to comment Share on other sites More sharing options...
zippy Posted July 13, 2023 Report Share Posted July 13, 2023 Place bike in 1st gear, set idle so that the bike will putter around with no throttle input without stalling. 1 Link to comment Share on other sites More sharing options...
castreuilo Posted December 26, 2024 Report Share Posted December 26, 2024 Often the idle channel is clogged, use an ultrasonic cleaner (€50 on Amazon) to free the carburetor. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now