Jump to content

Beta Rev 3 Wont Start After Replacing Throttle Cable


benbeta250
 Share

Recommended Posts

 

 

Put everything back as it was. Throttle feels fine. Got it started once after messing with throttle adjustment but died after taking choke off and wont start again now. Could be something simple like not enough fuel in the tank lol. Will check that later when i get some 2 stroke. Thanks for the reply

Link to comment
Share on other sites

 

died after taking choke off and wont start again now.

This sounds like blocked pilot jet.

It'll run on choke, but as soon as it's closed it can't draw fuel up the pilot jet due to the blockage so stalls.

Clean the carb (and jets) out and try again.

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...