Jump to content

legionnair

Members
  • Posts

    74
  • Joined

  • Last visited

Posts posted by legionnair
 
 
  1. Hello

    Its been awhile since last post but here we go

    My riding level is intermediate/sports an leaning more towards sports an

    The last couple of ride I have been solo with my four legged friend so i have to slow down alot

    In doing so I have been riding sections and tight trails in first gear not allowing myself to use the clutch only throttle control

    Wow what a difference it made for riding wetsections its a simple but difficult skill to master but it pays off big time

    Give it a go

    Dustin

  2. I have fixed many steel/aluminum stanctions

    Clean very well with iso alcohol

    Use JB weld to fill scratch/chip and use a rubber spatula it conforms the tube the best

    Allow it to fully harden over night is best

    Remove excess with 400- 500 grit wet sanding

    then polish with 1500-2000

    It is very labour intensive but works great and a permanent repair

    Ps either remove tube to do repair or wrap and oil soaked rag around tube above the seal to prevent grit from entering seal.

  3. Even better I am in the process of installing a high out put 12 volt compressor and a 3 gallon air tank I will put a coupler out front and back and just use a air nozzle to blast off the dirt. If this does not work. Will put a 5-6 gallon air tank and prefill it with water and use the air to pressure it and spray that.

    Just my idea

  4. Absolutely none just a gopro HD set on R4 which gives you the tallest view point. I believe this allows more down the trail view while still being adle to see the bike/rider input.

    Just upload the file straight to you tube.

    Thanks for the feed back

  5. Hello guys and gals

    I have a you tube channel where I try to put up new footage every week or so. It is raw as it happens footage I don't edit it I try to do some commentary while riding. I also try to show most of the trail or section I am riding. If you like a video please hit like or subscribe.

    Enjoy oh yeah in the videos when I am a tad frustrated I tend to drop alot of F-bombs just a warning.

    http://www.youtube.com/user/legionnair23?feature=mhee

    Dustin

  6. I bought one two months ago what a machine I have ridden it twice a week since, I had 2008 gasser 250 and the power is better but I find it way more control able that the 250. Brakes clutch all are very nice. Air box is vastly improved. Two things I don't like stock it comes with a cheap sparkplug made it a tough starter replace it with a platinum ngk and it is night and day, and you have to be diligent after every ride to go over the entire bike and tighten plus locktite everything cause it does vibrate a tade more.

    I would buy it again in a second

    Hope this helps

    Dustin

  7. I would be afraid to use a sealer because it has abrasives in it, even the coolant is a non-abrasive type. Cause bikes use a soft rubber like seal it will wear out quicker. It works in automotive seal cause they use to ceramic disks as the seal so they can handle it better.

    Sounds like you need to remove the rad and find some expanding rubber plugs and pressurize and submerge in water.

    Good luck

 
×
  • Create New...