nakednutt

Is there anywhere online with a manual for a 2007 250 sherco? I need to change fork seals and wouldn't mind a look at a manual before I do it. Thanks

has anyone had any trouble with the fan couling rubbing through the solder on the radiator? if so how do you stop it from happening

i checked it earlier and its definately drawing air in from somewhere. its fine until it gets warm then air bubbles start appearing in the cup. any ideas?

cheers copemech. i'll try that

i changed the seals today but it's still the same. it only pumps it out when the engine is warm. any ideas?

what would cause drops of oil to come out of a 2007 250 sherco gearbox breather apart from too much oil in it. i noticed the fill plug isnt seating great. i plan on ordering one from splatshop tomorrow.

anyone any experience with forma boulders? i fancy trying these http://www.ebay.co.uk/itm/FORMA-2011-BOULDER-TRIALS-QUAD-OFFROAD-BOOTS-BROWN-11-/360435043246?pt=UK_Motorcycle_Boots&hash=item53eb9a4bae

i changed the plates and took the grooves off the basket and its now spot on once warm. thanks again

when you cleaned the plates with a dremel did you take it right back to the steel? or just cleaned the groove?

will let you know how i get on. cheers

anyone any experience with the apico plates from bvm?

Thats the answer i was looking for. Cheers

i cleaned my clutch and it was rideable but still dragging for 3-4 outings but its back to dragging bad again.

thanks clay. i'm looking to change the full clutch.

anyone recomend a clutch?

also i've been using putoline light gear oil. is this ok or would atf be better and how often do you change the oil?

Whats the best replacement clutch to get for a 315 and where do i get it? Thanks in advance.

cheers nelly. i'll let you know how i get on

I'm going to try and spin the clamps so they face forward. See how it feels

thats what i got the idea from neil. ive had a look about and most stands are 430mm high. i'll fling one together soon on my lunch break

i work with a welder daily and i thought i would try and incorporate a magnetic tray in to it for any repairs i'm doing

do the mounts on the 315r always tilt backwards for the handlebars? and has anyone changed them for lifted spacers?how did use find them? sorry for all the questions lads i am just trying to find a way of easing the strain off my wrists

right lads i'm gonna build my own bike stand and wondered how high they normally are? its for a montesa 315r. cheers in advance