crazybond700

Thanks! Looks good

My gp2022 exhaust burned down in andorra event. I totally stripped and cleaned it now so will rebuild it to fresh. Only my heatsheald is loose now. What kind of glue will work for this?

Solved my problem in a different way, lol. Replacement!

Any recommandations for a decal kit for a 2014 replica raga (30th edition) and how to get them on succesfully? The filterbox is rubbed. Can i sand this with fine paper or something?

Sorry saw this only now. You get yourself a good measuring tool (caliper) and use the part underneath to rest on the fingers, and let the 'n point sit on the edge of the clutch basket. Should be around 17.5mm +-1 with a pack just below 10mm around 9.5 or 9.7ish. The fingerhight is the measure but pack thickness helps to get around the right fingerhight.

If ktm would have influence on the release they would call it the gp22 in 2021 lol

Anyone running (diy?) Covers for the link ystem of the suspension? Pictures?

I wonder if its the weather in your country which makes it so hard to start. My 300's always start 2nd kick. Both with the older dellortho and with the keihin carb.

Should the plate which is attached to the spring touch the inside bold? Or should it clear it?

ok, lol, i see it on the picture now, there is a small hook on the holder.

I smashed the holder of the sidestand of my gasgas trial 2014. I will let it off i think but want to repair it for if i want to sell the bike. I repaired the holder, it was bend on the inside near where the sidestand is, so the stand could not go ''down'' anymore. It is now in the correct shape again. But i am having trouble fitting it correctly. When i mount it, the spring does not seem to hold up the stand enough, it is like 5 to 10 cm below the swingarm/brake caliper, instead of touching the arm/brake disk protector like it should. The spring should mount on the rotation point of the stand right?

Thanks mates

Anyone know the name or partnumber of the spacer which holds the plastic tanks on newer models? Not the bolt with breather but underneath it.

Also remember not to turn the waterpump and crank. Also do assamble the cover when the bike is flat on its side.

Yes, but after that and measuring the airgap, you pull up the innertube all the way and reassamble the top part or put it on when the innertube is not up all the way?