[Converting 300 2023 gas gas txt to 250]

Put a extra base basket on will and make it softer and easier to start

[WTB: Dellorto PHBH26CS carburetor cota 315R]

Try eurocarb

[Brake drums]

It Can be done with wheel complete. Had my fantic done without stripping .

[Ethanol free petrol or lowest ethanol content petrol]

Aspen fuel or classic fuel solutions five star with lead. Not cheap but no ethanol and doesn't effect paint or plastics

[TY175 triple clamp bearings set]

In motion do them complete with seals

[Dented petrol tank]

Try Paul Davies at Cambridge trials

[Fantic 240 rear shock replacements]

Rock shocks

[BSA C15T electronic ignition]

Electrex world the best and easiest to set up. Not keen on pvl

[BSA B40 Rocker Cover]

yes the same. Do you mean the tappet covers. If so Burton bike bits of ebay

[Tiger cub exhaust]

Try bob at upb

[Tiger cub rear 520 sprocket]

Feked.com have 520 for cub. C15

[Frankfield garage]

Yes. The man for fantic

[Spares for fantic 200]

In motion. And Bill pye. 

[Alloy Hubs for B40 project]

Gerry Minshall 07889495178.

[Alloy Hubs for B40 project]

Gerry Minshall or Allan whitton. Both top quality

[199B resto]

Looking good. Keep us up to date with how it's going. I got a wider sump guard for my 199a from Kenton hackney

[Front brake drum Fantic 200]

Yes that's common. Plenty of people reline then. Look up Bill beverage he did mine.he's on facebook

[Coolant]

New shaft

[GasGas TXT 2018 Idle question]

Normal

[real bike weights]

Don't know about the others I have a gas gas 2017 GP it's 65kg

[Clutch grabbing]

Fasten the lever back to the bar's when your not riding it. Worked for me.

[199A Head Stay??]

If you don't use one you risk bending the top tube I've seen a lot with bent top tubes as a result of broken stays. On mine I've welded a long bolt into the channel where they break to add extra strenth. The 199b has a better head stay when mines stripped down for a repaint I'll be making one the same.

[Cub T20 crank Pin]

Try greystone enterprise. Or alpha bearings

[Alpina M116 Maximum bore size]

Inmotion in the UK list them up to 86mm if that's any help

[Clutch Plates]

In motion have them