barrybaines Posted December 12, 2006 Share Posted December 12, 2006 This is the best place I could think of putting this? if i`m wrong sorry Right then anyone know of somewere too get a decent set of rear sprocket nuts and bolts for a rev 3? all the ones i`ve come across on ebay seem too be of the countersunk variety. And I don`t really want too buy standard as they are made of what I can only describe as toffee. Quote Link to comment Share on other sites More sharing options...
cota kid Posted December 12, 2006 Share Posted December 12, 2006 I think Apico do some. Quote Link to comment Share on other sites More sharing options...
hughesy Posted December 12, 2006 Share Posted December 12, 2006 I'm not sure if these are suitable or any good http://www.trialsbits.co.uk/index.php?cPath=78_108 I'm in no way connected by the way, just a satisfied customer. Failing that try http://www.tastynuts.com/site/frames/frameset_shoponline.htm Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted December 12, 2006 Share Posted December 12, 2006 Think one of the site sponsors YOU HAVE USED WORDS OR A PHRASE WHICH ARE NOT PERMITTED ON THIS WEBSITE. PLEASE DELETE YOUR POST/TOPIC. DO NOT TRY TO CIRCUMVENT THE FILTERS IN PLACE ON THIS WEBSITE do sets. Quote Link to comment Share on other sites More sharing options...
the addict Posted December 12, 2006 Share Posted December 12, 2006 Barry. I,m going to the fixings shop this week they will have high tensile ones and I'll get you some. Dont be tempetd to stick stainless in there though(very soft) Dont think I've got any spares in the workshop but I will post them next week if ok Quote Link to comment Share on other sites More sharing options...
barrybaines Posted December 12, 2006 Author Share Posted December 12, 2006 Nice one Quote Link to comment Share on other sites More sharing options...
ask greeves Posted December 13, 2006 Share Posted December 13, 2006 (edited) Just a little trick i've used several times, countersink the sprocket and use countersunk capheads. this way the forces arn't just shear against the bolts, handy when the sprocket isn't a perfect fit on the hub and bolts. Edited December 13, 2006 by ask greeves Quote Link to comment Share on other sites More sharing options...
jamie stokes Posted January 4, 2007 Share Posted January 4, 2007 titanium bolts from the local hard wear(sp?)were? shop does the job and at Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.