tombo46 Posted August 29, 2009 Report Share Posted August 29, 2009 can anyone tell me if the dog bone bearings in the rear linkage from on 08 gas gas is the same as an 08 sherco? recently tried to fit some and made a complete hash of it, the seals wouldnt go in properly and it just went downhill from there. I know a guy who sells dog bone bearings for sherco's who lives nearby so I need to know if they will fit in my bike! also, any tips for fitting them would be great! I was using a 15mm socket to push them in, I also heated up the dog bones and put the bearings and seals in the freezer. thanks in advance! Tom Quote Link to comment Share on other sites More sharing options...
pistonbroke Posted August 29, 2009 Report Share Posted August 29, 2009 Use an engineers bench vice . The vice pushes them in square and makes the job easier ! Phil Quote Link to comment Share on other sites More sharing options...
mikee Posted August 31, 2009 Report Share Posted August 31, 2009 Did you put seals the right way round Tom ???? The rubber needs to face out.. Can't help with the Sherco seals, but the gas gas seals from BVM are dirt cheap. Quote Link to comment Share on other sites More sharing options...
copemech Posted September 1, 2009 Report Share Posted September 1, 2009 The seals are built into the bearings on the sherco. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.