Betaireland Posted February 24, 2020 Share Posted February 24, 2020 Beta rev 3 no spark bike cut out when out riding got it home no spark removed flywheel cover to find water around flywheel anyone any ideas what could be stopping from sparking Quote Link to comment Share on other sites More sharing options...
Bilko Posted February 25, 2020 Share Posted February 25, 2020 Stator, common problem with the rev 3's but saying that iv'e had 5 and never had a problem 1 Quote Link to comment Share on other sites More sharing options...
Betaireland Posted February 25, 2020 Author Share Posted February 25, 2020 (edited) I tested the ignition circuit in the bike this evening as I seen on another post that I should get roughly 300k ohms when I resistance tested the circuit I got I ie open circuit so stator is no good anyone know where a new stator can be got cheers Edited February 25, 2020 by Betaireland Quote Link to comment Share on other sites More sharing options...
feetupsbetter Posted February 25, 2020 Share Posted February 25, 2020 Try Bradford ignitions over in Cornwall (google them). Pop the stator in the post and it comes back rewound & sorted. Did my evo stator a while ago & perfect job (can’t remember cost though but cheaper than a new replacement). Quote Link to comment Share on other sites More sharing options...
scatman Posted February 25, 2020 Share Posted February 25, 2020 Steve has just done a stator for my 200 Evo, £125 which included return postage. Needless to say the bike runs perfectly now so all sorted. A new Evo stator is about £140 so it does work out cheaper to get it rewound and Steve's work is top quality. Hope you get yours sorted... Quote Link to comment Share on other sites More sharing options...
Betaireland Posted February 25, 2020 Author Share Posted February 25, 2020 Cheers for the replys I'm wating to hear back from beta uk on a price for a new one Quote Link to comment Share on other sites More sharing options...
scatman Posted February 25, 2020 Share Posted February 25, 2020 Your choice of course but I would get your existing one rewound rather than buy a new one. The quality of Beta stators is dubious at best and in my opinion a rewound one will probably last longer and not give you any more trouble. Quote Link to comment Share on other sites More sharing options...
Betaireland Posted March 15, 2020 Author Share Posted March 15, 2020 Bike is now repaired replaced stator with a new one from lampkins Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.