andyjohnson_10850 Report post Posted October 18, 2020 Recommendations for a tubeless rim supplier please Quote Share this post Link to post Share on other sites
pjw123 Report post Posted October 18, 2020 how many holes ?? Quote Share this post Link to post Share on other sites
old trials fanatic Report post Posted October 18, 2020 4 hours ago, andyjohnson_10850 said: Recommendations for a tubeless rim supplier please Sids Wheels Quote Share this post Link to post Share on other sites
andyjohnson_10850 Report post Posted October 18, 2020 fantic rear , not sure of holes , will check tomorrow...... thanks Quote Share this post Link to post Share on other sites
pjw123 Report post Posted October 18, 2020 Bill Pye can get you a 36 hole Morad Quote Share this post Link to post Share on other sites
chasbo Report post Posted December 30, 2020 Might be a stupid question, but how do you get in touch with Bill Pye? Quote Share this post Link to post Share on other sites
andyjohnson_10850 Report post Posted December 30, 2020 01642 722378 frank field garage (bill pye ) Quote Share this post Link to post Share on other sites
chasbo Report post Posted January 2 Brilliant, thanks. Quote Share this post Link to post Share on other sites
Antonio Report post Posted January 31 The Morad 36 holes currently made does not have the correct perimetral dimensions, mine was installed by a professional and had to be replaced by a second hand rim from old manufacturing. The dimensional difference is only of 7 mm. of the total weel perimeter, enough to loose air when in use, doing an inmersion test was not detectable, so the problem was not easy to find. The installation of tubeless rims on our bikes can not be successful if not done by a professional that knows how to correct the misalignment of the spokes, our brake diameter cubes differ from the ones the rim was designed, making recutting for proper alignment needed, not a job easy tot do. Regards Antonio Quote Share this post Link to post Share on other sites
