June 4, 20215 yr Hello The bike, the first target is to start the engine with a clean carburetor / exhaust and of course wheels (Tires/ spokes). I will manage to have a Vermont registration : its's means lights, horn with probably a new ignition with 12 volts supply. A long way to go 😪
June 8, 20215 yr Author Today I cleaned up the rear wheel, waiting the spoke to replace the 2 broken one. I also got the tires at a fare price (105 USD). Question: the gears are in left side, how are they working : 1N2345 or 54321N ?🤨 Thank you
June 13, 20215 yr Author Today job: Kickstand... The kickstand was broken and the shaft rusted inside. I had to cut it and to do a new pivot. I need to find a spring: Could you give me the size from the original one 😉?
June 13, 20215 yr Author Other item is the exhaust, my is badly cut 🤮 I found a cheap one in UK, to repair the old one is possible however the final cost will be the same (Welding, sand blasting, painting....). Wait and see...
June 21, 20215 yr Author I received the exhaust and it will fit, the fork tubes are difficult to slide out of the clamps 🥴 . Top end is schedule for this week, it will give me a good overview from the engine status 🙂. I bought this table in Ebay: Powerstands Racing POWERPLATFORM Powerplatform Portable Work Table. A good deal and easy to store when not in use...
June 21, 20215 yr Author Question: The nut from the flywheel seems not correctly in place ? Thanks for the advices 😏
June 22, 20215 yr 20 hours ago, Divouneh said: Question: The nut from the flywheel seems not correctly in place ? Thanks for the advices 😏 Yes that's the normal arrangement
June 22, 20215 yr Author The front wheel is clean outside, I need to remove and inspect the brake and the speedo connection 🙂...
June 22, 20215 yr Author Carburetor is ready for inspection, the plate to keep the cable in place is missing 😔...
June 25, 20215 yr Author After investigations, it seems some Amal have no plate to keep the cable in place. no one has had such issue ?🙄
June 25, 20215 yr Author Broken screw, the one to keep the rear shock in place 😪. The others one are removed. I will try to drill it with a "reverse" bit later, it's not a big issue..
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.