Montesa301 Posted Tuesday at 03:39 PM Author Share Posted Tuesday at 03:39 PM That’s the one, just pressed in. No rivets. Quote Link to comment Share on other sites More sharing options...
Montesa301 Posted Tuesday at 03:43 PM Author Share Posted Tuesday at 03:43 PM I had it apart again today and it had pushed itself out again. I have heard of people machining a grub screw in to hold it but I’m not brave enough to attempt that! Quote Link to comment Share on other sites More sharing options...
sportsawyer Posted 22 hours ago Share Posted 22 hours ago (edited) I believe it's the smaller gear (behind the primary gear), which meshes with the kickstart idler gear, that backs out. Mitani has a writeup about it here: http://mitani-ms.jp/info/2013/09/rtl-f-clatch-outer/ It's in Japanese, but my browser did a good enough job of translation to get the idea. Mitani makes an improved part, but it's not clear how they improve it: https://mitani-kobe.shop-pro.jp/?pid=60396201 Edited 22 hours ago by sportsawyer Clarification Quote Link to comment Share on other sites More sharing options...
Tr1AL Posted 1 hour ago Share Posted 1 hour ago (edited) On 5/12/2026 at 4:43 PM, Montesa301 said: I had it apart again today and it had pushed itself out again. I have heard of people machining a grub screw in to hold it but I’m not brave enough to attempt that! Perhaps something like LOCKTITE 270 anaerobic permanent adhesive could help or a strong bearing retaining anaerobic adhesive. such as LOCTITE 638 Edited 51 minutes ago by Tr1AL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.