Aprilia

Hi. Has anyone got a water pump to rad to header tank hose for sale. Thanks

Hello, i have a pair of aprilia TRX311 forks ans would likt to service them. anyone knows where to get parts for them? what oil do they need and how much? Kind regards Bob

Hello again. Has anyone got the full spec for a 280 climber carb. I have a good carb but the bike was originally a 240. I would like to know if it's just jets or needle and slide that need changing. Thanks

Hello we have revived our old 1982 Aprillia 50 trials and my son has started riding. After a carb and clutch rebuild it is running well and waiting for Milton Buzzards club to reopen. however, have a few questions we hop someone can help with: We could do with some tyres. The front is 2.5x21 which we can not find- will a 2.75 be suitable? On the rear we have a 3.0x18 as that was all we could find at the time. Think the original was 3.5 - does that sound correct? next is silencer: We are sure the rear silencer on our bike is not original and pretty noisy. Any advice on where we could find an quieter one? Anyone got pictures of an original? tha…

hi fella,s just joined this site and just aquired an aprilia climber , would appreciate some feedback on a couple of issues , iv,e had loads of bikes over the years but never a rotax jobbie and as you all know they all have thier own ways of getting on your last nerve . so first off bike runs for 5 seconds and dies ,cleaned carb out with airline , the same! mains are rumbling , plug soaked when stops ,and what is the 2 stroke mix on this bike , regards lee

So after a top end rattle noise I stripped the top end there is play in the crank large bearing top end has no play... I can get the crank kit or also I can get a full brand new crank already built up ..price is a bit hefty any advice on who could rebuild my bottom end for me ? I can rebuild the engine myself no problems but not confident in rebuilding a crank any help or suggestions where to start thanks

hello I am looking a txr swimgarm, someone know of someone

how do i tell what size motor my climber has ?