Jump to content

james111089

Members
 View Profile  See their activity

  • Posts

    427

  • Joined

  • Last visited

 Content Type 

Everything posted by james111089
 
 
  1. james111089
    how much is a stator going to cost me then James
  2. james111089
    hi, can someone measure there flywheel puller for me because the guy at trialsbits is going to get me one if he knows the size? James
  3. james111089
    has anyone got a puller i could borrow ?? pretty please
  4. james111089
    where should i start first i can pretty much garantee the carb is clean and fine as i rebulit the whole back end what shold i check now ?? wiring ? then what? James
  5. james111089
    if anyone want to sell me a puller ill pay you by paypal:) james
  6. james111089
    wouldnt the flywheel key also stop it running properly at teh bottom end tho? because it runs fine until about half throttle. James
  7. james111089
    it runs fine up to about a third of the throttle and thn at high revs like misses and doesnt rev cleanly James
  8. james111089
    if its still like it after ive clean the carb again etc etc ill have to pull the flywheel does anyone know the standard carb settings for an 02 rev3 so i can check all that. would anyone be kind enough to lend me a puller to see if the key has sheared James
  9. james111089
    its the flash type flame r2w James
  10. james111089
    its bloddy annoying hopely will solve it. it really annoys you and make u wanna sell the bike
  11. james111089
    but why is it throwing flames out the exhaust on the odd occasion at high revs
  12. james111089
    tell me if its done the trick marky when you have tried it James
  13. james111089
    local dealer is sammy miller and hes a tight *** so he wont stock 1 i will give the carb a clean i have tried a differnt plug and the carb was cleaned before i took it out(this is the first time i took it out) i have only had the bike for about 5 weeks. but i will double check by giving the carb another clean James
  14. james111089
    could it be the stator and how much will that cost to replace its an 02 rev3 250. anyone got a flywheel puller i could borrow or know where i can get 1. James
  15. james111089
    yes marky it makes the tank have a dull look like old plastics do but then all you need is some polish and its shinny again. it worked a treat on my ty250 pinky its the stuff thats in a small tub and its like paste dont be affraid to use alot of it on the sponge James
  16. james111089
    Help my beta is not runnig right Its not crisp at the top end and splutters and on the odd occasion spits a flame out the exhaust. any idea on whats wrong? James
  17. james111089
    i used astonish oven and cooker ware cleaner got it back to pure white and then some polish to put the shine back on to it James
  18. james111089
    the lever on the master cylinder i didnt touch till after i had bled it James
  19. james111089
    im not sure but i had to push very hard and the nipple was quite far open. Its an ajp 4 pot caliper James
  20. james111089
    any one seen these and know where there from?
  21. james111089
    he means kickstart shaft James
  22. james111089
    big syringe but had to push very hard to make the fluid move. yes i did use the bungee trick i think it mad a samll differance but not vast amounts. James
  23. james111089
    what sort of solder ??? and what do i need ??? i though it meant solder asin the stuff you do electric with??? never done this before so all help needed Many thanks James
  24. james111089
    so far so good seems to stop the bike moving James
  25. james111089
    any tips on cable making? ive just got a universal throttle cable kit off trialsbits.co.uk to make a throttle cable to suit my dt50mx so i can put a bigger carb on it and get rid of the auto lube. Many Thanks James
 
×
  • Create New...