adam1

I have read this and will have a go next week but just so i no how do you alter the tang and tab as i have never took a carb in bits so dont know what i will be looking at. Is it a case of bending or do you have to screw it out for example Cheers Adam

I have just bought a beta rev 3 250 and more than happy with it, i also used to have a montesa 315 250cc 99 model and thought that was great to and in your budget with tried and tested reliability Adam

Cheers for that will have a read tonight, just realised I talked to you today enquiring about the Ryan young DVD, I will phone again at the end of the month Adam

cheers for that but i have read this and cant see any pic's or vids showing the mods apart from the last one the pipe mod, but nothing showing the float or drilling method cheers adam

Hi Tony Is there any manual you can buy or video on here showing the mods on the carb or how to take the carb to bits and set it back up Cheers Adam

Can you point out which thread gives detail on how to fix this as I must be blind but can only find how to do the pipe method no pics showing the other methods Cheers Adam

Hi all my carb is leaking fuel out of the overflo and sometimes can be a pig to start, especially in gear and sometimes stalls going down hill but this could be me holding it on the brakes. Cheers Adam

Wish I was as good as some of those guys the beginning of the second vid looked hard going Adam

cheers For the replies guy's

I have just bought a 07 rev 3 and wieght 16st does this mean i need a new spring/springs Adam

Picked up my trials bike today, had a quick play out as the weather still quite bad but on first impressions i like it! Adam

Great write up Dan, i have just bought a beta rev 3 and i am going to ride with my mate who has a sherco 290, he also rides a mx bike and the first thing he said about my bike was the clutch and brake levers were to far back, now i relise why and am going to leave them in that postion till i get some skills and confidence. Cheers Adam Adam

That sounds like a nice police man!

That looks top mate, was thinking of getting a TTT black sticker kit for my 2007 250. Adam

Hi mate without sounding thick what does this mod fix? as i havent been on my bike yet and i am new to trials bikes Adam

Cheers for that had a look at steve Saunders site fancy the ttt graffix kit

Thanks for the quick response chaps, i have been reccomended PJ1 fully synthetic as this is what the local bike shop sells is this any good. Also can anyone reccomend a good quality grafix kit too! chers Adam

Cheers for the quick replies, Someone said a tyre had to be e marked? to be road legal and trials tyres are not stamped? i dont know. So if i want to ride some green lanes and more than likely some roads to get there what do i need or should i say what will i get away with/risk cheers Adam

Hi all, Just bought a 2007 250 rev 3 can anyone advise what gear oil to use and what ratio to run the fuel at and is there a easy way to work it out prob a stupid question. Adam

Hi all I am new to trials riding and i am probably asking a silly question what has been answered hundreds of time before but, i have just bought a 2007 beta 250 road registered so i can drive from my home 2 miles up the road to some local trials area's. I thought if my bike was insured,taxed,and a daytime mot this would be fine. I also have been told that trials tyres are not road legal and i could be issued with 6 points and a further 3 for the wrong sized number plate. I am slightly confused to how you can be issued a mot with none legal road tyres or a correct size number plate, and also dont fancy getting points. Hope someone can shed some light on the topic and sorry if its been asked before. Thanks in advance Adam

I have bought a 2007 beta rev3 250, will prob pick it up after christmas so will post up how i find it, cheers for all your comments Adam

I had a ride on my mates sherco 2.9 found it ok to be honest but it was wet and muddy so didn't feel the full potential, also had a ride on a montesa 4RT which i thought was ace loads of traction and low down grunt and quite easy to ride same again it was really wet so i imagine it has monster grip in the dry

anyone one any comments on montesa's or gas gas or even a 250 sherco?

Cheers for the replies guys, think i am going to go for a 250 or poss the 270 beta or maybe a 250 scorpa.

Hi all, just a quick hello, my name is Adam and i come from Burnley lancs, i dont have a bike at the min but i am on the look out for one. i used to have a 98 315 but only for a few weeks, so you could class me as a complete novice. I have quite a bit of experience on road bikes but not trials. I am looking for a bit of advice on which bikes are good/bad and wether to go 2 stroke or 4 stroke. A friend of mine has just bought a sherco 290 which i will be testing out on Fri but by all accounts they are a bit powerful cheers Adam