malcolm

I need to remove the clutch cover but can't get the kickstart removed from the shaft. Does anyone know how to do this. Thanks.

Thanks baldilocks and crazy bond 700.

Well spotted baldilocks, it's the pro, my other son has an Evo.

Can anyone advise what fluid to use when bleeding the clutch master cylinder on my 125 Evo 2012 - mineral or Dot 4. Thanks.

Thanks fastbelly

Thanks everybody for your replies. Sorry to be thick but how do you attach the lock wire. Cheers

Hello all, what is the best way to secure grips to the handle bars. Thanks

My son had a gas gas boy. On one outing the chain came of and wrapped around the gear selector. This resulted in the shaft of the gear selector getting bent, resulting in me having to strip the engine to replace the shaft. If you go for the gas gas make sure you keep the chain tensioned.

Thanks sirdabalot. Appreciate your reply.

Hello all, Looking to maybe buy a beta 125 2013. Can anyone advise on what to lookout for. Thanks

Hello, can anyone advise on the significance of polished gears and an engine that is ported. I am looking at a beta 125 2011 for my son that has had this done to it. Thanks.

thanks dadof2 Malcolm

hello all, I am thinking about buying a Beta Evo 125 (2010) for my son. Does anybody have an opinion on these bikes and are there any problems to be aware of? thanks

cheers tony27/copemech

cheers tony27. I really wanted to know how to remove the centre nut. I tried and was to heavy handed - ended up breaking one of the 6 stumps with the threaded holes for holding the pressure plate. Can the clutch be used with just 5 springs instead of 6?

hello all, can anybody advise how to remove the clutch hub on a Sherco 125 (2007). cheers

thanks Tony27/Copemech, the noise has just started, it dosent seem to have developed as you might expect if it was due to a component wearing out. Malcolm

Hello all, My son has a Sherco 125 2007. The bike starts and runs fine but when he pulls in the clutch lever (to put it into gear) there is a rattling sound from the area behind the clutch cover. The sound seems to go away when he puts the bike into gear. I can feel the rattling vibrate up to the clutch lever. Does anybody have any thoughts on what this is and how to fix it. thanks Malcolm

thanks copemech

cheers birdy

The chain tensioner on my sons bike has snapped so I need to replace it. Can anyone advise, are chain tensioners for trials bikes specific to a particular bike or can they pretty much fit any bike. For example will one from Gas Gas 125 fit a Sherco 125. thanks.

thanks all for the above advice/information.

I recently bought a 2006 Sherco 125 2 stroke. The bike seems to start and run ok with reasonable power but there is a rattling/vibration type noise coming from the engine. Any thoughts on what this might be? thanks.

Can anyone advise where I can get clutch plates for a gas gas contact 200 1993. thanks

cheers garrym