kevp22

Trial enduro direct ( gas gas uk ) You need to buy both tank graphics together , they don't come separately

Has anyone got contact details for the westmoorland motor club? Can't seem to find any on here or anywhere else. Thanks.

Go on to gasgasmotos.es down at the bottom of the page click manuals then change choose English from the select language tab and you can download all manuals and exploded diagrams

Have u tried loctite?

Which would you's recommend? And do the betas still suffer from the same carb and stator problems? Cheers.

Be careful if you're following the manual as its wrong,can't quite remember what parts wrong,it's to do with the diagram being deceiving,and you end up with far to much oil and will only get about half travel.

Think it probably is fuel to be honest,as it only really done it after I was going pretty quickly over a field,if didn't seem to be overheating or anything,I've cleaned the carb out and changed the pilot jet back to the standard one tonight and it seems to be running good,will take it out tomorrow and try it Cheers.

Looking for a bit of advice Just done the main bearings on my 06 rev3 250, put it all back together , started it up and it runs fine and sounds perfect. Took it out for a run and after about 10/ 15 mins it started to make a noise that sounded a bit like a top end rattle or knock then start to die then cut out but it started up again straight away and sounded perfect, then after another few mins same again but this time didn't cut out as I managed to keep it going by pulling the clutch in and catching it on the throttle. If I go and start it now it will go first kick and sound spot on, it only seems to happen after a wee while when its under load. The only other thing I have done is change the jets to the factory ones,27.5 and 145 I think. Any suggestions ????